eneo VK-1320/WDDG2

Home

Eneo

Eneo Dome Cameras

Eneo Dome Cameras Fixed

eneo VK-1320/WDDG2

View larger image

CODE: VK-1320/WDDG2

Description
Attachments
Mail to:

Type:
VK-1320/WDDG2

Description:
1/3" B/W Dome Camera, Drop-Ceiling Mount with 4-8mm Varifocal Lens, 12VDC, 380TVL

Features:
For Wall and Drop-ceiling Mount
Vandal and Tamper-Resistant
Clear Lexan Bubble with Inner Liner
1/3" B&W CCD Board Camera w. Manual Varifocal Lens
Integrated F1.6/4-8mm Varifocal Lens
Resolution of 380 Horizontal Lines
Automatic Shutter Control (AES)
Automatic Gain Control (AGC)
Back Light Compensation (BLC)
Manual 3-axis Camera Adjustment
For Easy Indoor and Outdoor Installation

Specifications:

Video standard	CCIR
System	black/white, CCIR/PAL
Sensor size	1/3"
Imager	CCD, 1/3" Interline transfer CCD
Active picture elements	300,000, 512(H) x 582(V)
Synchronization	Internal
Signal-to-noise ratio	46db (AGC OFF)
Sensitivity (at 50% video signal)	0,14Lux, at F1.2, 0.3Lux at F2.0 (Videor measurement result)
Horizontal resolution	380TVL
Rotation range	manual: 360°
Gain control	Automatic
Gamma correction	0.45
High-speed shutter (ESC)	1/50 ~ 1/100,000sec.
Integration rate	no
Digital Noise Reduction (DNR)	no
Backlight compensation	BLC, 60% center weighted
Switchable IR cut filter	no
IR cut filter	no
Video outputs (type)	VBS
Video outputs	1Vp-p, VBS, 75Ohm
Lens mount	integrated lens
Lens type	varifocal
Lens	F1.6~2.4 / 4~8mm (fixed iris)
Aspherical technology	no
Focal length	4-8mm
Horizontal angle of view	63-34°
Iris control	no
MOD (Minimum object distance)	0,15m
Filter screw size	not available
Cable connection	Video (BNC), 12VDC (DC jack)
Cable entry	3/4" and 1/2" thread for conduit glands, lock stopper included
Serial interfaces	no
Temperature range (Operation)	-10°C ~ +40°C
Heater	optional
Thermostat switching points	+2.4°C ON / +22°C OFF (heater kit 12V, #71664, optional)
Temperature range with built-in heater	-30°C ~ +40°C
Protection rating	IP65, at installation according to the manual
Supply voltage	12VDC
Power consumption	Approx. 2.0watts
Vandalism resistant	yes
Bubble	Vandal resistant 3mm clear polycarbonate bubble with inner liner
Colour (bubble)	clear
Camera fixing	board
Mounting	surface mount, wall mount
Housing	Outdoor, Die-cast aluminium with clear polycarbonate bubble
Housing material	Aluminium
Colour (housing)	Pantone Cool Gray 1C
Dimensions (HxWxD)	See drawing
Weight	approx. 750g
Colour	Pantone Cool Gray 1C
Parts supplied	Mounting kit, 1/2" gland, Blind covers, Torx wrench key
Certificates	CE

Accessory:

77773/VT-PS12DCDT1	PSU 12VDC/1.0A, Regulated, Desktop Version, 1.8m Cables each w. open ends
70543/VT-PS12DC-10	Plugable AC/DC Adapter 100-240V/12VDC- 2.5A, stab., Cont. & UK Mains plug-ins
70495/VT-PS12DC-7	Plugable PSU w. Cont. & UK Mains plug-in 100-240VAC/12VDC-1.25A, Regulated
71664/WDDG2/H12	Low Voltage Heater Kit 12V/8W for WDDG-2 housing
88149/3/4" - M25X1.5	Thread Adapter 3/4" - Conduit Connection M25x1.5mm for Dome Surface Mount Housing