System

day&night

Video standard

CCIR/PAL

Sensor size

1/2"

Imager

CCD, Sony ExView HAD Interline Transfer

Active picture elements

440,000, 752(H) x 582(V)

Signal processing

Digital (DSP)

Synchronization

Internal/Line lock (via OSD menu)

Signal-to-noise ratio

50dB (AGC OFF)

Gamma correction

0.45 (LCD Monitor)  0.6 (CRT Monitor)  1.0 (OFF)

Horizontal resolution

520TVL, (colour), 550 TV lines (B&W)

Sensitivity (at 50% video signal)

0,08Lux, at F1.2 (colour/AGC High), 0.002Lux at DSS On (40x integration/colour/AGC High), 0.02Lux at F1.2 (B&W/AGC High)

Manual electronic shutter (MES)

1/50 ~ 1/50,000sec.

Integration rate

yes, OFF, 4, 6, 8, 10, 20, 40 Fields

Digital Noise Reduction (DNR)

no

Automatic gain control (AGC)

ON/OFF switchable (via OSD menu)

Backlight compensation

BLC, eclipser, see eclipse function

White balance (AWB)

Auto / Hold / Indoor (approx. 2800K), Outdoor (approx. 6000K), selectable via OSD menu

Blemish compensation

Automatic blemish detection and compensation (for up to 10 pixels)

Aperture Correction (APC)

Horizontal and vertical

Flickerless function

On/Off switchable (via OSD menu)

Eclipser function

Eclipser level (On/Off, Low/Mid/High), Grey level (On/Off, Low/High)

IR cut filter

switchable

Window blanking

Up to 8 masking areas

OSD function control

OSD camera setup, DSS, Day/Night, Eclipser, Adaptive exposure control (AE), Blemish compensation, Iris open and back focus adjustment, Cable compensation, AWB, AGC Sync., Flickerless, Masking (Window blanking)

Set-up via on-screen menu

Camera adjustments: Address, Baud rate, LED/OSD ON/OFF

Camera title display

Textinsertion via OSD menu

Lens mount

CS

Usable iris controls

Manual iris, DC controlled iris

External adjustments

Flange focus  4 menu cursor buttons, RS-485 termination ON/OFF

Video outputs (type)

CVBS, VBS

Video output

1 Vp-p, (C)VBS, 75 ohms, BNC

External connections

Iris control (4-pin), Video (BNC), Power input, RS-485 interface, incl. external D&N switching

Serial interfaces

RS-485, Protocol: Pelco D

Camera mount

1/4" - 20 UNC thread on top and bottom

Supply voltage

12VDC, 24VAC, (+/-15%)  24VAC (+/-15%) 50/60Hz

Power consumption

approx. 4.7watts at 12VDC  6.5watts at 24VAC

Temperature range (Operation)

-10° ~ +50°C

Colour

similar to RAL 7048

Weight

200g

Parts supplied

4pin Lens plug, Allan wrench key, 7pin Control adapter cable with open ends, Manual and quick start guide on CD

Certificates

CE

77773/VT-PS12DCDT1

PSU 12VDC/1.0A, Regulated, Desktop Version, 1.8m Cables each w. open ends

74089/EDC-CR1

Converter RS-232/RS-485, Repeater RS-485

70769/WD-22

Wall Mount Bracket with Ball Joint, 1/4" Camera Fixing Screw, Beige Grey

70771/WD-23

Wall Mount Bracket with Ball Joint, 1/4" Camera Fixing Screw, Pantone 877

43252/G04Z03M-NFS

F1.2/4.5-12.5mm Lens, Var. Focal Length with No Focus Shift, 1/2", CS Mount

43251/G04Z03NDDC-NFS

F1.2/4.5-12.5mm DC Lens/variable Focal Length, No Focus Shift, 1/2" CS Mount

43239/A10Z04NDDC-NFS

F1.4/10-40mm DC Lens/var. Focal Length with No Focus Shift, 1/2" C  Mount

43106/C/CS RING-AL

Adapter Ring, C/CS Mount, Aluminium anodized

70495/VT-PS12DC-7

Plugable PSU w. Cont. & UK Mains plug-in 100-240VAC/12VDC-1.25A, Regulated

43266/A09Z10NDDC-NFS

F1.8/9-90mm DC Varifocal Lens, 1/2", IR correction (Non-Focus-Shift), C Mount

70536/VT-PS12DC-9

Plug-in Power Supply Unit 100-240VAC 12VDC (1.0Amp), Regulated, w. open Ends